Process objective
Calibration, stock removal, veneer, sealer or finish sanding
Determines head type and abrasive sequence.
R-RP630
R-RP630 Wide-Belt Sanding Machine for MDF and Wood Panels
R-RP630 Double Head Wide Belt Sander 630mm Woodworking Sanding Machine 32kW Motor for MDF Particle Board Solid Wood Furniture from JDRG Woodworking Machinery.
- machine type: Wood Sanding Machine
- video outgoing-inspection: Provided
- machinery test report: Provided
- core components: Motor
Configuration planning
Confirm the right R-RP630 configuration
This page presents the currently available information for R-RP630. The final machine, options and utilities should be matched to your material, workpiece and production target before ordering.
Send a representative drawing, material details and the destination electrical standard. JDRG can then confirm which configuration and technical sheet apply to your project.
Workpiece range
Maximum width, thickness range and minimum length
Confirms feed and hold-down suitability.Sanding heads
Roller, pad, brush or combined arrangement
Changes cutting action and achievable finish.Abrasives and feed
Grit sequence, feed range and material sensitivity
Affects scratch pattern, heat and output.Applications
Typical applications
- Panel calibration
- Veneer and solid-wood sanding
- Coating preparation
- Door and furniture-part finishing
Technical data
Specifications
Specifications should be confirmed for the selected configuration before ordering.
Model
R-RP630
machine type
Wood Sanding Machine
video outgoing-inspection
Provided
machinery test report
Provided
core components
Motor
warranty
1 Year
key selling points
Competitive Price
place of origin
CN;SHN
brand name
JDRG
weight (kg)
1300
power (kw)
32
Working Capacity
5-30m/min
Minimum Order
1
Unit
Piece
Weight
1300
Package Dimensions
150 × 120 × 200
Product questions
Buying questions
Answers for this equipment category. Final details depend on the selected configuration.
Provide the actual material or a close representative, along with incoming thickness, target thickness, finish requirement and coating stage.
Different rollers, pads and brushes produce different stock-removal and finishing behavior, so the sequence should match the process.
Yes, but the machine ports, dust type, duct layout and simultaneous operating condition should be considered together.
Product inquiry
Confirm configuration, price and delivery
Include panel material, workpiece dimensions, voltage and destination for a more accurate response.
